Nowadays people choose tiles for making the finishing of their walls and floors. Tiles can change altogether the look and interior of the house whether it is your living room or bedroom or washroom, sophisticated tiling can change the whole perspective and view of your house. A new set of tiles can transform the interior of your house, giving it a sophisticated new look. However it must also be borne to mind that tiling is not at all an easy task and there are different hitches and problems in it. In order to get the task of tiling done in flawless and immaculate manner, it is important to consider certain important points and keep them in mind.
If these points are not considered, you may make any mistake while tiling you may also have to pay for that in the long run. Therefore certain techniques and cautions should be brought into practice in order to achieve a successful tiling. An overview of some of the common mistakes which we make during tiling and tips to avoid them is as follows:
Every tiling project has different challenges and concerns and that is why it should be handled with care and technique. It is not a just do it task and it needs a lot of research of materials and labor as well because everyone cannot do it precisely. A proper planning is very important to avoid complications. For example determination of kind of tile or stone which suits your application, requirement of sealing with the stone or tile, sensitivity of tile to moisture and ensuring the presence of all the important accessories is very important.
Not addressing the issue of water sensitivity:
While doing the project of tiling in a water sensitive area like the kitchen or bathroom, it is very important to pay attention towards the waterproofing of tiles. If this point is ignored, you may have to pay a lot on repairs and may also face an irreversible breakdown of the building. In this regard the first thing is to check the pounding or settling of water on the raw floor. If this happens then you may have to face the drainage issues.
Not paying attention to efflorescence:
Efflorescence is the phenomenon when there is a deposition of crystalline and sometimes powdery substance on the surface after the evaporation of water and this mostly happens on the surface of porous tiles, or masonry. This often appears in the form of a whitish coating and can also spoil the structure and surface of the tiles making them rough. Therefore it is important to check for the drainage of water below the layer of tiles and also use a layer or creed over the surface of tiles.
Poor planning about the design:
Often people consider tiling as being a simple task where there is only the activity of cutting and fixing the tiles involved. In fact it is quite a tiresome task if done systematically and by following the correct technique. Even the simplest tile patterns can be a mess especially at the edges and corners if you do not properly plan out the design vision of the tile. Therefore it is advised to avid small tile cuts at the entry areas and middle spaces and before finally applying the adhesives, it is better to first lay out dry tiles and check for the vision that how will it come out finally.
Not paying attention to the slate:
If the raw surface where your tiles will be laid is rough or moist then this could be quite destructive for the tiles. Therefore the best way for testing the surface is to spray the concrete surface and check for any soaking or mark.
Not observing the rules of adhesion:
The adhesive requirements of different tiles are quite different. Therefore always make sure to choose the correct adhesive for the kids of tiles or stones you are using. If by any chance you live in canton and wants a transition to a tiling floor then you should ask Flooring contractors in canton Michigan for professional advice.
February 16, 2017