Every house owner who is living in a hot climate prefers fire-resistant siding. The siding that protects your house from fire damage and damage of hail is one and only corrugated steel siding. The different designs of traditional wooden log cabin and modern style of shiny platinum design can be found in corrugated steel siding. The cost effective siding can be purchased from a manufacturer with custom builds design and exact measurement which is required for your house or building.
- Siding panels in custom cut.
- Hammer and 2 inches galvanized steel nails.
- Electric shears and nibbler.
- a power saw and caulking.
- string and chalk line.
- Safety glasses and gloves.
Preparation of Surface:
Determining whether the surface needs siding is clear and clean is the initial and important step. The irregular and dirty surface is not good for siding. The more the surface is prepared with meticulousness, the more it would depict the beauty. Remove the old paint on the surface and see whether there are caulking and nails on the surface and remove it carefully. Fill the spaces with putty. If the wood is weathered and you see that your house is quite old then arranges wood furring for preparing the surface.
The purpose here is to see that the vertical siding would not be unequal so draw a line from top side to the bottom side. It would not make your installation unequal. Now start caulking lines all around your house for ensuring an equal baseline.
Cut the Steel:
Corrugated steel siding that comes in custom cut based on your measurement is more beneficial to use. This is because there is more danger of steel sheets being tedious. Asking for help and working with a partner on this project would prove better than working alone. Use electric shear, nibblers, and power saw wherever appropriate for creating an ease in your project. Follow all the safety precautions because it can harm you. Wearing safety glasses on your eyes and gloves on your hands would turn into your safety while cutting the steel. So wear it for staying safe.
From the Base with Siding:
The siding needs to be installed in a systematic way. The bottom should be filled first so take a siding and install it at the bottom. Installing the bottom would give you a protective base which would go from horizontal direction from the top side to the bottom side. References lines would provide you a guide in this step. It would be easier for you to install the siding by following the caulk lines.
Install Vertical Siding:
Installation of vertical siding is a more challenging task so take help from the partner for this step. Start installing the siding vertically to applying the siding vertically. Avoid misalignment. Do not install the siding in an imperfect way because it would create problems in future. Connecting siding is also very important so apply caulking for attaching siding with one another. Apply it on the joints for a stronger overlap. This step would keep your siding safe in bad weather.
Finish the Siding with Nails:
Do not be satisfied with apply caulking only. You must ensure the firm grip which is only possible through finishing the siding with nails. Fasten the sheets of steel with the plain surface through nailing with the hammer. Perform it carefully and only insert one nail at one point. Do not twist the nails and finish your process.
The above-mentioned steps seem very easy which can be followed by any house owner. However, if you are concerned about perfection then you can consult with a professional. If you are facing problems while installing corrugated steel siding then you really need to contact professional Residential Siding contractors in grosse ile Michigan for assistance.
April 27, 2017