Do you wish to convert the scorching heat in Michigan to electricity? But you also have to change your roof shingles as they’re a bit old? Then the two-in-one solution to your problem is the solar roof shingles. Solar roof shingles provide you with the two-in-one feature of roof shingle as well as solar panels. You just have to install these shingles on to your roof and enjoy as the shingles convert the scorching heat into electricity for your roof. Since, Michigan is a bit hot during winters therefore the residents are interested in roof inspection Ann Arbor Michigan and solar roof installation.
Solar roof shingles are bit typical to install but if you have enough experience in electric works then you can easily install them. You will be needing the below equipment to install the solar roof shingles:
- Solar Shingles
- Felt sheeting
- Nail gun
- Long cut snips
After gathering the above equipment you’re ready to start installing the solar roof shingles by following the steps below:
1. Understanding the shingles:
Firstly, see that if you have a bit sunny environment around your society because the solar roof shingles require sunlight to produce electricity; the more sunlight, the more electricity. Secondly, inquire if you need any type of permission from the society administration. Lastly, see if your roof has enough room for the installation of the shingles.
2. Removing the old shingles:
Carefully remove your old shingles along with their nails as they can result in great difficulty while installing the shingles. You can use a prybar to assist yourself in this.
3. Applying felt sheeting:
After removing the old shingles, carefully apply the felt sheeting onto the roof to protect your roof from water, snow or ice and nail it down carefully.
4. Adding the solar wiring:
After nailing the felt paper on the roof, drill holes on the roof so that the wiring for the solar roof shingles can be transferred down the roof. These wiring’s are then connected to the energy generation source.
5. Adding the shingles:
Carefully place the solar shingles on the roof according to the size of the shingles and your roof. Start from the lower left corner of the roof. Firstly, place the shingle on the roof keeping its wiring away. Carefully insert roofing nails on both the sides of the shingle.
After that take another shingle place it beside the other shingle in a small area provided. Carefully nail this shingle too.
Do this on both the sides.
6. Wiring the shingles:
After carefully nailing all the shingles in a row, connect the wires together of the first row. Do the same with other rows as well and connect the remaining part of first row with the remaining part of second row and so on.
Then connect the wire to the solar wiring going down the roof.
7. Installing metal drip edge:
Carefully install the metal drip edge so that the shingles don’t get affected by them.
June 26, 2018