Hot water is essential for day-to-day life. One cannot do without it on a daily basis. It has also been proven that hot water is therapeutic and helps in reducing stress. Hot water systems are the best constant source of hot water in the household. Good systems are an asset as well as the necessity of a household. Regular maintenance of the system ensures that it never fails and increases its life span. The proper installation makes sure that a household never runs out of hot water. Here are some points to consider so that you can reduce the probability of hot water systems failures.
#1. Electric Supply and Use:
For the proper working of any electrical appliance, it is necessary that they are used properly. Taking care of the fact that hot water systems should be switched on just in time. One must not overuse such appliances. This increases the life span of the system and ensure that they never fail. If there is a frequent fluctuation in current supply then a good stabilizer should be installed along with the system. The geyser should also be connected to a miniature circuit breaker (MCB). This will further reduce any chances of short circuit or malfunctioning. For uninterrupted power supply to the system, it is advisable to keep an inverter connected to the circuit. The system should be set at low temperatures to save electricity as well as to make it long lasting.
#2. Maintenance:
Proper maintenance is essential for any electronic appliance and gadgets. Hot water systems often go through intense wear and tear. Therefore, trained professionals must check them at regular intervals. Maintaining the appliances make sure that they run efficiently without any trouble. The companies and manufacturers often provide contractual services at a reasonable cost. Engaging in such contracts is always advantageous and profitable. Hence, annual check-ups and services are an important factor to ensure hot water never runs out. Hire only reliable and reputed hot water service centers for the maintenance of your geysers. Safety devices inside the system need annual checking and maintenance.
#3. Precautions While Installation:
Keep in mind that hot water systems are installed in a spacious area. There should be enough of space between the appliance and the wall. This is necessary to make sure that there is enough room for the technician to work with his tools. Another important point to consider while the installation of these systems is that the height where it should be fixed at. The proper height ensures proper pressure of hot water flow and keeps the working of the geyser hassle-free.
#4. Prevent Corrosion:
Hard water tends to create layers of rust or corrosive salts. These layers create insulating coats on the anode rods inside the hot water systems. Thus, making them inactive or less active. Regular checkup and replacement of these rods keep the system in a good working condition. It is suggested by the experts that these rods should be checked in every 3 years to see if the outer magnesium layer has corroded away exposing the inner steel layer. If such a case arises, the anode rods should go for replacement. If the rods collect a sedimentary layer of calcium, then they need replacement.
#5. Proper Water supply:
Sufficient water should be stored in the overhead tank and proper connections should be made to the geyser. Proper water supply and plumbing will ensure that the geyser runs smoothly without any problem. Hence, the pipes should be installed carefully.
Conclusion
Continuous hot water supply is a necessity. To increase the life span of hot water systems, the above-mentioned points will be highly helpful. Lastly, it is always advisable to buy a branded geyser as local systems do not come with customer support, or warranty in case damages occur.
May 13, 2019