Concrete flooring is one of the latest trends when it comes to flooring across the world. When compared to vinyl floors, you don’t need to polish a concrete floor to maintain it. This helps the users in saving a lot of money. However, there are many flooring systems that require a good amount of maintenance and care to ensure that the floor serves the purpose.
How To Simplify the Maintenance of Your Concrete Floor?
While designing the concrete flooring Melbourne, you should take double care to ensure that there are no cut patterns. This is because these patterns tend to trap a whole lot of dirt. In areas where there is high traffic, it is best to use mats in the floor. These mats help in easy maintenance of the floors. In addition to all of this, you can ensure that the maintenance schedule is followed to the T and ensure the longevity of the floor.
Some Useful Tips To Maintain Concrete Flooring Melbourne Are:
It is best to ensure that the spills and stains are immediately washed when they are noticed on the floor. It is best to not be complacent and let it to be cleaned later. If a cleaner is applied on a concrete flooring Melbourne, it should be allowed sufficient time to settle down before the debris and dust are cleaned. This is very important if you are looking to remove sticky particles like grease and grime. If this is not done, then it means that you need to increase your effort that is required to clean the floor. One more way that you can follow is to split the floor into different strips and systematically clean them.
The Products Used to Clean Concrete Flooring:
A cleaner that has a neutral pH is the best option for concrete flooring Melbourne. It is best to check with your contractor for recommendations on the best cleaning solutions available in the market. It is a good practice to avoid rough cleaners like vinegar, bleach, citrus, or pine type of cleaners. This is because the rough ones tend to react a lot with the surface.
In addition to the cleaner, the different cleaning pads used should be good as well. It is best to use microfiber cleaning pads in order to clean concrete flooring Melbourne. In areas where there is heavy traffic, it is best to use auto scrubbers or swing buffers.
Losing Shine or Polish
If you notice that floor is losing the polish or shine effect, it is best run a high speed or dry-run kind of burnisher on the floor. Wet burnishing is clearly possible with the help of Guard, a polished type of concreting solution. The process of burnishing will help in grinding the dirt that is on the floor and help in bringing back the shine. It is best to renew the polishing of concrete flooring Melbourne once in two years. This type of equipment can be either purchased online or from stores.
It is best to get a microfiber for cleaning the floor and removing micro digs and direct particles. Concrete has soil as one of its ingredients that act as abrasives and helps in attracting a lot of dust. When it is stacked, there are dust particles that ruin the overall look of the house. When the concrete floor is made to undergo a wet wash, you should ensure that you use clean water and mops. In commercial type of buildings, there are automatic scrubbers that can be clean concrete flooring. In residential buildings, it is best to use manual mops.
November 25, 2019